DiniArgeo DGTPK: Digital weight transmitter / indicator with extended keyboard

Multifunction weight transmitter for table or panel mounting. Ideal as a microcontroller in industrial weighing and dosage systems, making an easier and safer integration of the weighing to any automation system. Fitted with 4 inputs and 6 outputs, programmable. Numerical keyboard for the quick entry of the setpoint and the tare. Approvals: ● CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID), Australian approval ● 20-key numeric/functional waterproof keyboard: quick entry of the setpoints and the tare value. ● Highly efficient red LED display with 6 20-mm digits and 12 LEDs for showing active functions. ● Stainless steel case for panel mounting. ● Frontal panel in alluminium, with protection gasket. ● Front panel dimensions: 170x170mm. ● Panel cutout: 161x162mm. ● Fitted with bracket for use on table or wall mounting. A/D 24-bit sigma-delta conversion, up to 400 conv./sec. autoselect. ● Connectable with up to 16 analogue load cells with 350 Ohm input resistance. ● Up to 800.000 displayable divisions with internal resolution up to 3.000.000 points. ● Management of a digitally equalised 4-cell weighing system or management of 4 independent weighing systems. ● Calibration, Set-Up parameters, configurable from keyboard or from PC with DINITOOLS. ● Up to 8 signal linearization points with DINITOOLS (3 from keypad). ● Time/Date ● From 12 Vdc to 24 Vdc power supply. EU, UK, US, AU plugs included as standard. ● Fitted with 12 V switching power adapter. ● CE-M EN 45501 ● OIML R76 ● OIML R61 - MID ● OIML R51 ● Australian legal for trade certificate of approval (NMI S788) THROUGH KEYBOARD: ● Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by. ● Quick entry of the setpoints and the tare values. SELECTABLE: ● High Resolution Weighing x 10; Lb/kg conversion; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option) e Peak. Available in 7.15 firmware version downloadable from the DOWNLOAD area: ● Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold. EXTERNAL INPUT: ● Simulation of key pressure; Keyboard lock. MOSFET OUTPUT: ● Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability. SERIAL PORTS: ● On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds. ● DGTPKV2 and DGTPKANV2 models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol. THROUGH 16 bit ANALOGUE OUTPUT (DGTPKANV2): ● Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading). ● Specific programme for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW. FUNCTIONING MODES: ● Multi-scale repeater (MASTER): function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales. ● UNIVERSAL weight repeater: function which allows to repeat the weight of any scales, through the configuration of the input string. ● 1 RS232/C or RS485 bidirectional port configurable for connection to PC or external units. ● 1 RS232/C bidirectional port configurable for connection to printer. ● PROFIBUS serial interface (DGTPKPBV2 model). ● 6 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions. ● 4 optoisolator photocouplers inputs: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions. ● 16-bit analogue output (DGTPKANV2 model) 4-20mA / 0-5Vdc / 0-10Vdc at choice. Maximum load applicable on the output current: 300Ohm. Minimum load applicable on the output voltage: 1kOhm.