DiniArgeo DGT4: 4-channel weight transmitter

4-channel weight transmitter for weight transfer to PLC via fieldbus, analog output or RS485. It allows the reading and diagnostics of each load cell or each connected scale (up to 4). Available versions: ● PROFINET I/O | ETHERNET IP | ETHERCAT | MODBUS TCP | DEVICENET | PROFIBUS | ANALOG OUTPUT | RS485 Approvals: ● CE-M EN 45501, OIML R-76, OIML R-61 (MID), OIML R-51 (MID), Australian approval Integrated WebServer as standard ● Power supply: 12-24Vdc ● Converter: A/D 24 bit with 4 channel ● Max scale number: 4 ● Load cells connection: 4 or 6 wires (with sense) Operating modes: ● Digital junction box ● Multi-scale transmitter ● Conversion rate: up to 3200 conv./sec ● Selectable sampling rate: up to 400 conv./sec ● Displaying: up to 800.000d ● Signal sensitivity: 0,03 µV/d (0,03 µV/e) ● Resolution: 3.000.000 points ● Linearization: up to 8 points ● Connectable load cells: up to 8 350 Ω cells ● BUS: depending on the model (See version chart) Serial ports: ● 1 RS232 for configuration from PC with "Dinitools®" ● 1 RS485 Port (Mod. DGT4 / DGT4 AN) ● Analog output: 16 bit (DGT4AN Model) choosing between 4-20mA, 0-5Vdc or 0-10Vdc. ● Digital outputs: n. 2 configurable OUTPUTS ● Digital inputs: n. 2 configurable INPUTS Certifications: ● CE-M EN 45501 ● OIML R76 (10000e o 3000 + 3000e) / R51 / R61 MID ● UL Listed (upon request) ● EU Type Examination Certificate (45501:2015) ● Australian legal for trade certificate of approval (NMI S788) ● Case: ABS, for Din bar (106 x 90 x 58 mm) Calibration: ● Theoretical (mV\V) ● With sample weights ● Remotely by WEB SERVER ● From the keyboard ● From PC with "Dinitools" Keyboard functions: ● Zeroing ● Tare ● Function mode ● Manual data printing/sending ● On/Stand-by Program functions: ● Setpoint ● High resolution ● Peak ● Alibi Memory ● Unit of measure conversion ● Available in 7.15 firmware version downloadable from the DOWNLOAD area: ● Net/Gross; Weighs totalisation; Formulation; Counting; In/Out Truck weighing and Hold. ● Keyboard: mechanical with 5 digits ● Display: 13mm red LED ● NET, GROSS and TARE weight ● DIGITAL INPUTS status ● RELAY OUTPUTS status ● SETPOINT setting ● Alibi memory writing and reading (optional) ● Weight status (eg positive, negative, stable, unstable) ● Error conditions (eg overload, underload) ● Calibration ● SETUP configuration ● Diagnostics of each converter channel UL certificated version ● Special programs according to customer specifications ● Kit for legal for trade approval ● The integrated WEB SERVER allows complete diagnostics, calibration and remote configuration of the weight transmitter from ethernet network. Only for PROFINET, ETHERNET IP and MODBUS TCP models.