DiniArgeo SPSZ series single point stainless steel load cells

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 800x800 mm. C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED MADE IN 17-4 PH STAINLESS STEEL IP68 PROTECTION MAX. CAPACITIES FROM 500 TO 1000 kg FOR PLATFORMS WITH DIMENSIONS UP TO 800 X 800 mm SHIELDED CONNECTION CABLE TEST CERTIFICATE AVAILABLE UPON REQUEST ● Minimum load cell verification interval: ● Vmin = EMax / 7.500-12.500 ● Maximum number of verification intervals: nLC = 3000 ● Full Scale Output: 2mV/V +/- 10% ● Temperature effect on zero: from ±0,0112% F.S./10K to ±0,0186% F.S/10K ● Temperature effect on full scale output: ±0,0117% F.S./10K (-10°C/+20°C) ±0,0170% F.S./10K (+20°C/+40°C) ● Compensated Temperature Range: -10°C/+40°C ● Operating Temperature Range: -10°C/+50°C ● Creep at nominal load in 30 minutes: ± 0,01% F.S. ● Maximum tolerated excitation voltage: 15 VDC ● Input Resistance: 380 ± 15 Ohm ● Output Resistance: 300...500 Ohm ● Insulation Resistance (100V) >2000 MOhm ● Safe Overload: 150 % F.S. ● Ultimate Overload: 300% F.S. ● Nominal displacement: < 0.5 mm ● 6-wire shielded cable, 3m long, 5mm diameter