DiniArgeo SPSY series single point stainless steel load cells

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 500x400 mm. C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED MADE IN 17-4 PH STAINLESS STEEL IP68/IP69K PROTECTION MAX. CAPACITIES FROM 10 TO 100 kg FOR PLATFORMS WITH DIMENSIONS UP TO 500 X 400 mm SHIELDED CONNECTION CABLE TEST CERTIFICATE AVAILABLE UPON REQUEST ● Minimum load cell verification interval: Vmin = EMax / 10.000 ● Maximum number of verification intervals: nLC = 3000 ● Full Scale Output: 2mV/V +/- 10% ● Temperature effect on zero: ±0,014% F.S./10K ● Temperature effect on full scale output: ±0,0117% F.S./10K (-10°C/+20°C) ±0,0175% F.S./10K (+20°C/+40°C) ● Compensated Temperature Range: -10°C/+40°C ● Operating Temperature Range: -10°C/+50°C ● Creep at nominal load in 30 minutes: ± 0,01% F.S. ● Maximum tolerated excitation voltage: 15 VDC ● Input Resistance: 380 ± 15 Ohm ● Output Resistance: 350 ± 10 Ohm ● Insulation Resistance (100V) >2000 MOhm ● Safe Overload: 150% F.S. ● Ultimate Overload: 300% F.S. ● Nominal displacement: < 0.5 mm ● 6-wire shielded cable, 3m long, 5mm diameter