DiniArgeo SPSW series single point stainless steel load cells

Stainless steel load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 500x400 mm. C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED MADE IN 17-4 PH STAINLESS STEEL IP67 PROTECTION MAX. CAPACITIES FROM 7.5 TO 200 kg FOR PLATFORMS WITH DIMENSIONS UP TO 500 X 400 mm SHIELDED CONNECTION CABLE TEST CERTIFICATE AVAILABLE UPON REQUEST ● Minimum load cell verification interval: Vmin = EMax / 10.000-15.000 ● Maximum number of verification intervals: nLC = 3000 ● Full Scale Output: 2mV/V +/- 10% ● Temperature effect on zero: from ±0,0093% F.S./10K to ±0,0140% F.S./10K ● Temperature effect on full scale output: ±0,0117% F.S./10K (-10°C/+20°C) ±0,0175% F.S./10K (+20°C/+40°C) ● Compensated Temperature Range: -10°C/+40°C ● Operating Temperature Range: -10°C/+50°C ● Creep at nominal load in 30 minutes: ± 0,01% F.S. ● Maximum tolerated excitation voltage: 15 VDC ● Input Resistance: 380 ± 15 Ohm ● Output Resistance: 359 ± 5 Ohm ● Insulation Resistance at 100V: >1000 MOhm ● Safe Overload: 150% F.S. ● Ultimate Overload: 300% F.S. ● Nominal displacement: < 0.5 mm ● 6-wire shielded cable, 3m long, 5mm diameter The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to: ● ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga ● ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT). IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.