DiniArgeo SPBC series single point load cells

Load cells for off center loads, suitable for example to build CE-M approved scales with a single load cell with maximum dimensions of 700x700 mm. C3 PRECISION CLASS OFF CENTER LOAD COMPENSATED MADE IN ALUMINIUM ALLOY IP65 PROTECTION MAX. CAPACITIES FROM 100 TO 630kg FOR PLATFORMS WITH DIMENSIONS UP TO 700 X 700 mm SHIELDED CONNECTION CABLE OIML CERTIFICATE AVAILABLE UPON REQUEST TEST CERTIFICATE AVAILABLE UPON REQUEST ● Minimum load cell verification interval: Vmin = EMax / 10.000 ● Maximum number of verification intervals: nLC = 3000 ● Full Scale Output: 2mV/V +/- 10% ● Combined error: 0,017% of Full Scale Output (F.S.) ● Temperature effect on zero: 0,0014% /°C ● Temperature effect on full scale output: 0,0014% /°C ● Compensated Temperature Range: -10°C/+40°C ● Operating Temperature Range: -20°C/+60°C ● Creep error after 30 minutes: 0,025% F.S. ● Maximum tolerated excitation voltage: 15 VDC ● Input Resistance: 410 ± 20 Ohm ● Output Resistance: 350 ± 5 Ohm ● Zero Balance: +/-10% F.S. ● Insulation Resistance: >1000 MOhm ● Safe Overload: 150% F.S. ● Ultimate Overload: 200% F.S. ● Nominal displacement: < 1mm ● SPBC 6-wire shielded cable, 3m long, 5mm diameter The CCATEX certificate makes the load cell suitable for use in hazardous areas with protection methods according to: ● ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) TX (Ta -20÷+65°C) Ga ● ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) TX°C (Ta -20÷+65°C) Da IP65. The certificate includes the manual and the ATEX CE conformity declaration (available in EN, DE, FR, and IT). IMPORTANT: the certificate refers to the single load cell. For systems with more load cells, it is necessary to order one certificate for each load cell.